本帖最后由 diablo77521 于 2013-11-6 19:29 编辑
About this book This book is released under a Creative Commons AttributionNoncommercial NoDerivative Works 3.0 Unported License. You are free to share, i.e. , copy, distribute and transmit this work under the following conditions: • Attribution: youmust attribute the work in themanner specified by the author or licensor; • Noncommercial :you may not use this work for commercial purposes; • NoDerivativeWorks: you maynot alter, transform, or build upon this work. Credits This book was prepared for the First International Workshop on“Low-cost 3D Printing for Science, Education & SustainableDevelopment” held in Trieste, Italy in 2013, organized by the ICTP ScienceDissemination Unit (SDU). The purpose of this activity was to discuss and createawareness on the new 3D printing throughdemonstrations on a number of available competing technologies,as well as presentations of ongoing research into new applications. Special focus was given to the applicability of 3D printing to promote appropriate technologies for sustainabledevelopment, scientific research and education.
有关于此书： 这本书的出版基于以下原则，共同署名权-非商业性-禁止衍生作品3.0授权条款。满足以下条款，您可以免费复制、使用、传播本书中的信息： l 署名权：必须署名作者和版权拥有者； l 非商业性：不得用于商业用途； l 禁止衍生作品：不能修改、改变或者在该作品上进行创作。
Credits： 本书是为第一届国际研讨会“面向科学、教育及可持续发展的低成本3D打印”准备的。此次研讨会在意大利的里雅斯特市进行（2013 年）。组织方是ICTP科学传播机构（SDU）。活动目的是，通过阐述大量现存的竞争性技术，比如展示正在研究的技术应用，讨论和构建新的3D打印概念。此次研讨会重点关注 3D 打印机应用在可持续发展、科学、教育研究方面。
Editors Enrique Canessa is a PhDPhysicist working as Coordinator of ICTP-SDU. His main areas of research are in the fields of condensed matter and scientific software applications, with particular focus on disseminating science to, and within, developing countries using open source, rich-media,mobile technologies and also 3D printing. Carlo Fonda works for the ICTP-SDU. He is also involved in training and projects on low-cost wireless telecommunications for education, research and development. His interests include, among others, computerprogramming, rich-media and webcastingfor science, use of mobile devices for education, and also 3Dprinting. Marco Zennaro received his Engineering degree in Electronics fromthe University of Trieste, Italy and his PhD from KTH-Royal Institute of Technology, Stockholm, Sweden. He is currently working at ICTP in projects involving wireless sensor networks, multimedia, open access andArduino-based technologies. His research interests are also on information and communication Technologies fordevelopment (ICT4D). 作者： Enrique Canessa 是一位物理学博士，作为在ICTP-SDU工作的协调员。主要的研究领域是凝聚态物体和科研软件的应用，特别关注在发展中国家的传播科学，比如开源产业、多元媒体、移动技术当然也包括3D 打印机等领域的技术进展。
Carlo Fonda在 ICTP-SDU 工作，致力于培训和面向教育、研究和发展的低成本无线电通讯，主要对象是本国的学校以及其他国家的相关部门。研究方向包括利用移动设备在软件编程，多元媒体，网络广播在教育中的使用，当然也包括3D 打印技术。
Marco Zennaro，在意大利里雅斯特大学取得电子工程学学士学位，在瑞典斯德哥尔摩市KTH-Royal 技术研究所取得博士学位。目前在 ICTP 工作，致力于无线传感网络，多媒体，开放存取和基于Arduino的技术。研究方向包括信息和通讯技术的发展。
Funding Development and publication of this book have been made possible with funding support from The Abdus Salam International Centre forTheoretical Physics, Trieste, Italy
Special Thanks Our sincere thanksgo to the many authors of the contributions written for the book. We have givenproper attribution to the author(s) of each section and/or chapter included inthis work. We would also like to acknowledge the contribution and support of Professor Fernando Quevedo (ICTPDirector), Ms. Mary Ann Williams, Ms. Lisa Iannitti, Mr. Jonathan Gatti, Ms. Gaya Fior and the Multimedia Publications & Printing Services of ICTP, and everyone else who has made this project possible.
基金： 编写本书的资金来源是意大利里雅斯特市的 Abdus Salam 理论物理国际研究中心。
特别感谢： 对编著本书内信息的那些作者，致以诚挚的感谢。感谢他们参与本书每一个部分的编写。我们还要感谢Fernando Quevedo 教授（ICTP 的主管），Mary Ann Williams 女士，Lisa Iannitti 女士，Jonathan Gatti 先生，Gaya Fior 女士和 ICTP 的出版社，以及其他对这本书的编写给以了帮助的朋友们。 file:///C:\Users\shdlzhan\AppData\Local\Temp\msohtmlclip1\01\clip_image002.gif
| 
楼主
京公网安备11010802043351